Supported Operating Systems for Intel® Server Board S5000PSL

Documentation

Compatibility

000007941

02/07/2020

This page contains a list of supported operating systems for the Intel® Server Board S5000PSL. Operating systems not listed below are not supported by this Intel Server Board.

 

Operating System Type Of Testing Note
Microsoft Windows Server 2008 R2*, 32-bit Installation Only  
Microsoft Windows Server 2008 R2*, 64-bit Installation Only  
Microsoft Windows Server 2008*, 32-bit Compatibility & Stress  
Microsoft Windows Server 2008*, 64-bit Compatibility & Stress  
Microsoft Windows Server 2003* Release 2/Windows*
Small Business Server 2003 SP1
Compatibility & Stress 3
Microsoft Windows Server 2003* Release 2, 32-bit Service Pack 2 Compatibility & Stress  
Microsoft Windows Server 2003*, 64-bit, Release 2, Service Pack 2 Compatibility & Stress  
Microsoft Windows 2000 Server*, Service Pack 4 Basic Installation  
Red Hat* Linux Enterprise Server AS 4.0 Update 2 (64-bit) Compatibility & Stress  
Red Hat* Linux Enterprise Server AS 4.0 Update 4 (32-bit) Basic Installation  
Red Hat* Linux Enterprise Server AS 4.0 Update 4 (64-bit) Compatibility & Stress  
Red Hat* Linux Enterprise Server AS 5.0 (32-bit) Compatibility & Stress  
Red Hat* Linux Enterprise Server AS 5.0 (64-bit) Compatibility & Stress  
Red Hat* Linux Enterprise Server AS 5.0, Update 1 (64-bit) Compatibility & Stress  
SuSE* Linux Enterprise Server 9 RC5/SP3 (64-bit) Basic Installation  
SuSE* Linux Enterprise Server 9 RC5/SP3 (32-bit) Basic Installation  
SuSE* Linux Enterprise Server 10 (64-bit) Compatibility & Stress  
SuSE* Linux Enterprise Server 10 (32-bit) Basic Installation  
SuSE* Linux Enterprise Server 10 , SP1 (32-bit) Compatibility & Stress  
SuSE* Linux Enterprise Server 10 , SP1 (64-bit) Compatibility & Stress  
Novell NetWare* 6.5 (SP5) Basic Installation  
Sun* Solaris 10 U4 (08/07) Compatibility & Stress 4

 

For a list of Operating System certifications, please check the Tested Hardware Operating System List located on support.

 

Notes
  1. Adapter/Peripheral Compatibility & Stress testing is performed only on the most current release of a supported operating system at the time of a given validation run. The Adapter/Peripheral Compatibility & Stress testing process consists of three areas: Base Platform, Multiple Adapter, and Endurance:
    • Base Platform: Each base platform will successfully install a given operating system, successfully run a disk stress test, and successfully run a network stress test.
    • Adapter Compatibility: Adapter compatibility validation (CV) testing uses test suites to gain an accurate view of how the server performs with a wide variety of adapters under the primary supported operating systems. These tests are designed to show hardware compatibility between the cards and the server platform and include functional testing only. No heavy stressing of the systems or the cards is performed for CV testing.
    • Stress Testing: This test sequence uses configurations that include add-in adapters in all available slots, (depending on chassis used) for a minimum 72-hour test run without injecting errors. Each configuration passes an installation test, a Network/Disk Stress test, and tape backup test. Any fatal errors that occur will require a complete test restart.
  2. Basic installation testing is performed with each supported operating system. Basic installation testing validates that the server board can install the operating system and that the base hardware feature set is functional. A small set of peripherals is used for installation purposes only. No add-in adapter cards are tested. Testing may include network connectivity and running of proprietary and industry standard test suites.
  3. The Microsoft* Windows Small Business Server application portion was not tested or supported.
  4. The on-board RAID controller (ESRT II) should be disabled as there are no drivers available.