How to configure the BIOS to enable the Option ROM using the Intel® Rapid Storage Technology enterprise (Intel RSTe)
Cannot get into the RSTe Option ROM Bios due to the CTRL-I prompt message not been seen at boot up.
This only happens when BIOS Boot Mode is configured as UEFI.
Follow these steps:
- Boot into the serverboard Bios by pressing F2 key while the system boots.
- Go into the Boot Maintenance Manager option.
- Enter into the Advanced Boot Options.
- Change the Boot Mode from UEFI to Legacy.
- Exit the Bios saving changes (F10>Y).
For more information on Bios option refer to:
BIOS Setup Utility Guide for Intel® Server Systems
Boot Mode was configured as UEFI.