Article ID: 000037552 Content Type: Install & Setup Last Reviewed: 07/26/2021

Rear Hot-swap Dual Drive Cage Upgrade Kit A2UREARHSDK Integration

Environment

Intel® Server System R2208WFTZS 2U Rear Hot-swap Dual Drive Cage Upgrade Kit A2UREARHSDK2 Intel® Server System R2000WF Intel® Server Board S2600WF

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Steps as to how to connect the Rear Hot-swap Dual Drive Cage Upgrade Kit A2UREARHSDK

Description

Does not detect drives after installing bay

Resolution
  1. Remove the two screws securing the bay cover plate to the chassis.
  2. Unlatch and remove the bay cover plate from the chassis.
  3. Carefully remove the backplane module from its packaging.
  4. Position the drive bay module over the power supply bay and slide it back until it is flush with the back of the chassis panel.
  5. Secure the drive bay module to the chassis using four screws: two on the chassis sidewall, and two on the chassis back panel.
  6. From the backplane accessory kit, locate the following cables:
    User-added image
  7. Connect the 2x3 power cable connector (labeled SB) to the server board peripheral PWR connector.
  8. Connect the 2x3 power cable connector (labeled BP) to the backplane PWR connector.
  9. Connect the 5-pin I2C cable connector to the matching HSBP_I2C connector on the backplane.
  10. Connect the 3-pin I2C cable connector to the matching HSBP_I2C connector on the server board.
  11. Match and connect the 7-pin SATA Drive_0 and Drive_1 cable connectors to the Drive_0 and Drive_1 connectors on the backplane.
  12. Connect the 5-pin SATA SGPIO cable connector to the SGPIO connector on the backplane.
  13. Match and connect the 7-pin SATA4 and SATA5 cable connectors to the sSATA4 and sSATA5 connectors on the server board.
  14. Connect the 5-pin SATA SGPIO cable connector to the SGPIO connector on the server board.

For more information, refer to the 2 x 2.5" Rear Mount Backplane Module Accessory Kit Installation section of the System Integration and Service Guide.

Related Products

This article applies to 1 products