Article ID: 000074505 Content Type: Troubleshooting Last Reviewed: 10/11/2019

Why does a dynamic reconfiguration operation fail when using Intel® Stratix 10 fPLL FPGA IP configured in Core mode?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in Intel® Quartus® Prime Pro Edition Software version 19.3 and earlier, when targetting an Intel Stratix® 10 L-tile or H-tile FPGA device you will see the Dynamic Reconfiguration tab in the IP editor when configuring the Intel Stratix 10 fPLL FPGA IP in Core mode. 

    However, the dynamic reconfiguration feature is not supported for the Intel Stratix 10 fPLL FPGA IP when configured in Core mode. 

    Resolution

    To work around this problem, if the dynamic reconfiguration feature is required by your design do not configure the Intel® Stratix® 10 fPLL FPGA IP in Core mode if applicable. 

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs