Article ID: 000084935 Content Type: Troubleshooting Last Reviewed: 05/10/2023

Why can't I connect the transceiver reconfig_to/from_xcvr ports between the Reconfiguration Controller and the 1G/10GbE and 10GBASE-KR PHY IP in the Platform Designer on Stratix® V GX devices using the Quartus® II software v2.1 and earlier?

Environment

  • Quartus® II Subscription Edition
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    It is not possible to connect the transceiver reconfig_to/from_xcvr ports between the reconfiguration controller and the 1G/10GbE and 10GBASE-KR PHY IP in the Platform Designer on Stratix® V GX devices due to a bug in the Quartus® II software v12.1 and earlier.

    Resolution

    To work around this problem, export the reconfig_to/from_xcvr ports of the transceiver Reconfiguration Controller and the 1G/10GbE and 10GBASE-KR PHY IP and connect in your RTL.

    This problem is fixed in the Quartus II software v13.0.

    Related Products

    This article applies to 1 products

    Stratix® V GX FPGA

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.