DisplayPort Arria® 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. DisplayPort Design Examples 3. HDCP Over DisplayPort Design Example 4. DisplayPort Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. DisplayPort Intel® FPGA IP Design Example Hardware and Software Requirements 1.3. Generating the DisplayPort Intel® FPGA IP Design Example 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating .elf File
2. DisplayPort Design Examples x
2.1. Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Arria® 10 DisplayPort SST TX-only or RX-only Design Features 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
2.4. Arria® 10 DisplayPort SST TX-only or RX-only Design Features x
2.4.1. Arria® 10 DisplayPort SST TX-only Design Features 2.4.2. Arria® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios® V Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Setting Up the Hardware 3.4.2. Generating the Design 3.4.3. Including HDCP Production Keys 3.4.4. Compiling the Design 3.4.5. Viewing the Results
3.4.3. Including HDCP Production Keys x
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. DisplayPort Design Examples
3. HDCP Over DisplayPort Design Example
4. DisplayPort Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Arria® 10 FPGA IP Design Example User Guide

1.5. Compiling and Testing the Design

To compile and run a demonstration test on the hardware example design, follow these steps:
  1. Ensure hardware example design generation is complete.
  2. Launch the Quartus® Prime software and open <project directory>/quartus/a10_dp_demo.qpf.
  3. Click Processing > Start Compilation.
  4. After successful compilation, the Quartus® Prime software generates a .sof file in your specified directory.
  5. Connect the DisplayPort RX connector on the Bitec daughter card to an external video source, such as the graphics card on a PC.
  6. Connect the DisplayPort TX connector on the Bitec daughter card to a video analyzer or a DisplayPort sink device, such as a PC monitor.
  7. Ensure all switches on the development board are in default position.
  8. Configure the selected Arria® 10 device on the development board using the generated .sof file (Tools > Programmer ).
  9. The DisplayPort sink device displays the video generated from the video source.

Section Content
Regenerating .elf File

Related Information
Level Two Title