Interlaken (2nd Generation) Intel® FPGA IP User Guide

ID 683396
Date 9/26/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2. PMA Adaptation Parameters

After device configuration, you may need to trigger PMA adaptation on the RX interface to achieve optimal performance. The PMA interface performs adaptation for initial adaptation and continuous adaptation which runs continuously in background.
Figure 5. PMA Adaptation OptionsYou specify settings on the PMA Adaptation tab for both initial and continuous adaptation. PMA Adaptation is only available for E-tile variants.
Table 19.  PMA Adaptation
Parameter Value Description
Enable adaptation load soft IP On/Off Enables PMA adaptation parameter customization.
PMA adaptation select

PAM4_56Gbps_LR

PAM4_56Gbps_VSR

NRZ_28Gbps_LR

NRZ_28Gbps_VSR

NRZ_10Gbps_25/15/10dB

Selects pre-defined PMA configuration parameters.
Table 20.  Initial Adaptation Parameters
Parameter Value Description
GS1 Fw_default, 0, 1, 2, 3 CTLE Low Frequency Gain Shaping 1.
GS2 Fw_default, 0, 1, 2, 3 CTLE Low Frequency Gain Shaping 2.
RF_B1 Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8 RF_B1 Setting.
RF_B1 Fix/Adaptable Fixed, Adaptable RF_B1 Setting.
RF_B0 Fw_default, 0, 1, 2, 3, 4, 5 RF_B0 Setting.
RF_B0 Fix/Adaptable Fixed, Adaptable RF_B0 Setting.
RF_A Fw_default, 100, 110, 120, 130, 140, 150, 160 RF_A Setting.
GAINLF Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 CTLE Low Frequency Gain.
GAINLF Fixed/Adaptable Fixed, Adaptable CTLE Low Frequency Gain.
CTLE LF Min Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits CTLE LF minimum.
CTLE LF Max Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits CTLE LF maximum.
GAINHF Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Inputs CTLE High Frequency Gain.
GAINHF Fixed/Adaptable Fixed, Adaptable Inputs CTLE High Frequency Gain - Fix or Adaptable options.
CTLE HF Min Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits CTLE HF minimum.
CTLE HF Max Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits CTLE HF maximum.
RF_P2 Fw_default, -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 RF_P2 setting.
RF_P2 Fixed/Adaptable Fixed, Adaptable RF_P2 setting - Fix or Adaptable options.
RF_P2 Min Fw_default, -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Limits RF_P2 minimum.
RF_P2 Max Fw_default, -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Limits RF_P2 maximum.
RF_P1 Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 RF_P1 setting.
RF_P1 Fixed/Adaptable Fixed, Adaptable RF_P1 setting - Fix or Adaptable options.
RF_P1 Min Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits RF_P1 minimum.
RF_P1 Max Fw_default, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Limits RF_P1 maximum.
RF_P0 Fw_default, -15, -14, -13, -12, -11, -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Sets RF_P0.
RF_P0 Fixed/Adaptable Fixed, Adaptable Limits RF_P0 - Fix or Adaptable options.
RF_B0T Fw_default, 10, 15, 20, 25, 30, 35, 40, 45, 50 Controls the rate RF_B0 adapts.