AN 814: Intel Arria 10 Two x8-Lane JESD204B (Duplex) IP Cores Multi-Device Synchronization Reference Design

Download PDF
ID 683731
Date 1/30/2018
Public
Document Table of Contents
Document Table of Contents x
1. Intel® Arria® 10 Two x8-Lane JESD204B IP Cores (Duplex) Multi-Device Synchronization Reference Design
1. Intel® Arria® 10 Two x8-Lane JESD204B IP Cores (Duplex) Multi-Device Synchronization Reference Design x
1.1. Hardware and Software Requirements 1.2. Reference Design Walkthrough 1.3. Reference Design Functional Description 1.4. Document Revision History for AN 814: Intel® Arria® 10 Two x8-Lane JESD204B IP Cores (Duplex) Multi-Device Synchronization Reference Design
1.2. Reference Design Walkthrough x
1.2.1. Hardware Setup 1.2.2. Running the Reference Design 1.2.3. Software Parameters 1.2.4. Software Functions Description 1.2.5. Reconstructing Design and Running in Hardware 1.2.6. Viewing the Results
1.2.2. Running the Reference Design x
1.2.2.1. Configuring the FPGA 1.2.2.2. Executing the Software C Code and Initializing the JESD204B Link
1.2.4. Software Functions Description x
1.2.4.1. Functions in main.c Source File 1.2.4.2. Custom Peripheral Access Macros in macros.c Source File
1.2.5. Reconstructing Design and Running in Hardware x
1.2.5.1. Regenerating Files, Recompiling Design and Configuring the FPGA 1.2.5.2. Rebuilding Software and Initializing the JESD204B Link
1.3. Reference Design Functional Description x
1.3.1. Top Level HDL 1.3.2. Clocking Scheme 1.3.3. FPGA Pin Assignments
1.3.1. Top Level HDL x
1.3.1.1. Platform Designer Top System Component 1.3.1.2. Transport Layer 1.3.1.3. Test Pattern Generator 1.3.1.4. Test Pattern Checker 1.3.1.5. Deterministic Latency Measurement Module 1.3.1.6. Frequency Checker
1.3.1.1. Platform Designer Top System Component x
1.3.1.1.1. JESD204B Subsystem 1.3.1.1.2. Nios® II Subsystem in Platform Designer 1.3.1.1.3. Core PLL 1.3.1.1.4. PLL Reconfiguration Controller 1.3.1.1.5. SPI Master
1.3.1.1.2. Nios® II Subsystem in Platform Designer x
1.3.1.1.2.1. Nios® II Processor 1.3.1.1.2.2. Nios® II Subsystem Address Map
1. Intel® Arria® 10 Two x8-Lane JESD204B IP Cores (Duplex) Multi-Device Synchronization Reference Design

1.2.1. Hardware Setup

Perform the following steps to setup the hardware for the reference design:

  1. Install the FMC Loopback Card module to the FMC port A (J1) on the Intel® Arria® 10 FPGA development board.
  2. Do not change the default switching settings.
    Note: For more details about default switching settings, refer to the Intel® Arria® 10 FPGA development board user guide.
  3. Connect the micro-USB cable to the micro-USB connector (J3) on the development board.
  4. Connect the power adapter shipped with the development board to power supply jack (J13).
  5. Turn On the power for the Intel® Arria® 10 FPGA development board.
    The hardware system is now ready for programming.
    Figure 1. Reference Design Hardware Setup
Related Information
Level Two Title