DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 9/02/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2. Device Family Support

Table 4.   Intel Device Family Support
Device Family Support Level
Intel® Agilex™ (F-tile) Preliminary
Intel® Stratix® 10 (H-tile and L-tile) Final (for UHBR20,

only Preliminary support)

Intel® Arria® 10 Final
Intel® Cyclone® 10 GX Final
Arria V GX/GT/GS Final
Arria V GZ Final
Cyclone V Final
Stratix V Final

The following terms define device support levels for Intel FPGA IP cores:

  • Advance support—the IP core is available for simulation and compilation for this device family. Timing models include initial engineering estimates of delays based on early post-layout information. The timing models are subject to change as silicon testing improves the correlation between the actual silicon and the timing models. You can use this IP core for system architecture and resource utilization studies, simulation, pinout, system latency assessments, basic timing assessments (pipeline budgeting), and I/O transfer strategy (data-path width, burst depth, I/O standards tradeoffs).
  • Preliminary support—the IP core is verified with preliminary timing models for this device family. The IP core meets all functional requirements, but might still be undergoing timing analysis for the device family. It can be used in production designs with caution.
  • Final support—the IP core is verified with final timing models for this device family. The IP core meets all functional and timing requirements for the device family and can be used in production designs.

The following table lists the link rate support offered by the DisplayPort Intel® FPGA IP for each Intel FPGA family.

Table 5.  Link Rate Support by Device Family
Device Family Dual Symbol

(20-Bit Mode)

Quad Symbol

(40-Bit Mode)

FPGA Fabric Speed Grade
Intel® Agilex™ (F-tile) RBR, HBR, HBR2 RBR, HBR, HBR2, HBR3 1
Intel® Stratix® 10 (H-tile) RBR, HBR, HBR2 RBR, HBR, HBR2, HBR3, UHBR10, UHBR20 (Preliminary support only) 1, 2, 3 3
Intel® Stratix® 10 (L-tile) RBR, HBR, HBR2 RBR, HBR, HBR2, HBR3 1, 2, 3 3
Intel® Arria® 10 RBR, HBR, HBR2 RBR, HBR, HBR2, HBR3 1, 2
Intel® Cyclone® 10 GX RBR, HBR, HBR2 RBR, HBR, HBR2, HBR3 5, 6
Stratix V RBR, HBR, HBR2 RBR, HBR, HBR2 1, 2, 3
Arria V GX/GT/GS RBR, HBR RBR, HBR, HBR2 3, 4, 5
Arria V GZ RBR, HBR, HBR2 RBR, HBR, HBR2 Any supported speed grade
Cyclone V RBR, HBR RBR, HBR Any supported speed grade
Table 6.  Adaptive Sync Support by Device FamilyThe Adaptive Sync feature is available only in the Intel® Quartus® Prime Pro Edition software.
Device Family Adaptive Sync Support
Intel® Agilex™ (F-tile) Yes
Intel® Stratix® 10 (H-tile and L-tile) Yes
Intel® Arria® 10 Yes
Intel® Cyclone® 10 GX Yes

To enable the Adaptive Sync feature, refer to Table 32 and Video Interface (TX Video IM Enable = 1). For detailed implementation of the feature, refer to the DisplayPort SST Parallel Loopback with Adaptive Sync Support section in the respective DisplayPort Intel® FPGA IP design example user guides.

3 Conditional support for Intel Arria 10 and Intel Stratix 10 FPGA Fabric Speed Grade 3. Contact your sales representative for more information.